Skip Headers
Oracle® Grid Infrastructure Installation Guide
11g Release 2 (11.2) for Solaris Operating System

Part Number E10816-03
Go to Documentation Home
Go to Book List
Book List
Go to Table of Contents
Go to Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Go to next page
View PDF

D How to Complete Installation Prerequisite Tasks Manually

This appendix provides instructions for how to complete configuration tasks manually that Cluster Verification Utility (CVU) and the installer (OUI) normally complete during installation. Use this appendix as a guide if you cannot use the fixup script.

This appendix contains the following information:

D.1 Configuring SSH Manually on All Cluster Nodes

Passwordless SSH configuration is a mandatory installation requirement. SSH is used during installation to configure cluster member nodes, and SSH is used after installation by configuration assistants, Oracle Enterprise Manager, Opatch, and other features.

Automatic Passwordless SSH configuration using OUI creates RSA encryption keys on all nodes of the cluster. If you have system restrictions that require you to set up SSH manually, such as using DSA keys, then use this procedure as a guide to set up passwordless SSH.

In the examples that follow, the Oracle software owner listed is the grid user.

If SSH is not available, then OUI attempts to use rsh and rcp instead. However, these services are disabled by default on most systems.

This section contains the following:

D.1.1 Checking Existing SSH Configuration on the System

To determine if SSH is running, enter the following command:

$ pgrep sshd

If SSH is running, then the response to this command is one or more process ID numbers. In the home directory of the installation software owner (grid, oracle), use the command ls -al to ensure that the .ssh directory is owned and writable only by the user.

You need either an RSA or a DSA key for the SSH protocol. RSA is used with the SSH 1.5 protocol, while DSA is the default for the SSH 2.0 protocol. With OpenSSH, you can use either RSA or DSA. The instructions that follow are for SSH1. If you have an SSH2 installation, and you cannot use SSH1, then refer to your SSH distribution documentation to configure SSH1 compatibility or to configure SSH2 with DSA.

D.1.2 Configuring SSH on Cluster Nodes

To configure SSH, you must first create RSA or DSA keys on each cluster node, and then copy all the keys generated on all cluster node members into an authorized keys file that is identical on each node. Note that the SSH files must be readable only by root and by the software installation user (oracle, grid), as SSH ignores a private key file if it is accessible by others. In the examples that follow, the DSA key is used.

You must configure SSH separately for each Oracle software installation owner that you intend to use for installation.

To configure SSH, complete the following:

D.1.2.1 Create SSH Directory, and Create SSH Keys On Each Node

Complete the following steps on each node:

  1. Log in as the software owner (in this example, the grid user).

  2. To ensure that you are logged in as grid, and to verify that the user ID matches the expected user ID you have assigned to the grid user, enter the commands id and id grid. Ensure that Oracle user group and user and the user terminal window process you are using have group and user IDs are identical. For example:

    $ id 
    uid=502(grid) gid=501(oinstall) groups=501(oinstall),502(grid,asmadmin,asmdba)
    $ id grid
    uid=502(grid) gid=501(oinstall) groups=501(oinstall),502(grid,asmadmin,asmdba)
  3. If necessary, create the .ssh directory in the grid user's home directory, and set permissions on it to ensure that only the oracle user has read and write permissions:

    $ mkdir ~/.ssh
    $ chmod 700 ~/.ssh


    SSH configuration will fail if the permissions are not set to 700.
  4. Enter the following command:

    $ /usr/bin/ssh-keygen -t dsa

    At the prompts, accept the default location for the key file (press Enter).


    SSH with passphrase is not supported for Oracle Clusterware 11g release 2 and later releases.

    This command writes the DSA public key to the ~/.ssh/ file and the private key to the ~/.ssh/id_dsa file.

    Never distribute the private key to anyone not authorized to perform Oracle software installations.

  5. Repeat steps 1 through 4 on each node that you intend to make a member of the cluster, using the DSA key.

D.1.2.2 Add All Keys to a Common authorized_keys File

Complete the following steps:

  1. On the local node, change directories to the .ssh directory in the Oracle grid infrastructure owner's home directory (typically, either grid or oracle).

    Then, add the DSA key to the authorized_keys file using the following commands:

    $ cat >> authorized_keys
    $ ls

    In the .ssh directory, you should see the keys that you have created, and the file authorized_keys.

  2. On the local node, use SCP (Secure Copy) or SFTP (Secure FTP) to copy the authorized_keys file to the oracle user .ssh directory on a remote node. The following example is with SCP, on a node called node2, with the Oracle grid infrastructure owner grid, where the grid user path is /home/grid:

    [grid@node1 .ssh]$ scp authorized_keys node2:/home/grid/.ssh/

    You are prompted to accept a DSA key. Enter Yes, and you see that the node you are copying to is added to the known_hosts file.

    When prompted, provide the password for the grid user, which should be the same on all nodes in the cluster. The authorized_keys file is copied to the remote node.

    Your output should be similar to the following, where xxx represents parts of a valid IP address:

    [grid@node1 .ssh]$ scp authorized_keys node2:/home/grid/.ssh/
    The authenticity of host 'node2 ( can't be established.
    DSA key fingerprint is 7e:60:60:ae:40:40:d1:a6:f7:4e:zz:me:a7:48:ae:f6:7e.
    Are you sure you want to continue connecting (yes/no)? yes
    Warning: Permanently added 'node1,' (dsa) to the list
    of known hosts
    grid@node2's password:
    authorized_keys       100%             828             7.5MB/s      00:00
  3. Using SSH, log in to the node where you copied the authorized_keys file. Then change to the .ssh directory, and using the cat command, add the DSA keys for the second node to the authorized_keys file, clicking Enter when you are prompted for a password, so that passwordless SSH is set up:

    [grid@node1 .ssh]$ ssh node2
    [grid@node2 grid]$ cd .ssh
    [grid@node2 ssh]$ cat  >> authorized_keys

    Repeat steps 2 and 3 from each node to each other member node in the cluster.

    When you have added keys from each cluster node member to the authorized_keys file on the last node you want to have as a cluster node member, then use scp to copy the authorized_keys file with the keys from all nodes back to each cluster node member, overwriting the existing version on the other nodes.

    To confirm that you have all nodes in the authorized_keys file, enter the command more authorized_keys, and determine if there is a DSA key for each member node. The file lists the type of key (ssh-dsa), followed by the key, and then followed by the user and server. For example:

    ssh-dsa AAAABBBB . . . = grid@node1


    The grid user's /.ssh/authorized_keys file on every node must contain the contents from all of the /.ssh/ files that you generated on all cluster nodes.

D.1.3 Enabling SSH User Equivalency on Cluster Nodes

After you have copied the authorized_keys file that contains all keys to each node in the cluster, complete the following procedure, in the order listed. In this example, the Oracle grid infrastructure software owner is named grid:

  1. On the system where you want to run OUI, log in as the grid user.

  2. Use the following command syntax, where hostname1, hostname2, and so on, are the public hostnames (alias and fully qualified domain name) of nodes in the cluster to run SSH from the local node to each node, including from the local node to itself, and from each node to each other node:

    [grid@nodename]$ ssh hostname1 date
    [grid@nodename]$ ssh hostname2 date

    For example:

    [grid@node1 grid]$ ssh node1 date
    The authenticity of host 'node1 (' can't be established.
    DSA key fingerprint is 7z:60:60:zz:48:48:z1:a0:f7:4e.
    Are you sure you want to continue connecting (yes/no)? yes
    Warning: Permanently added 'node1,' (DSA) to the list of
    known hosts.
    Mon Dec 4 11:08:13 PST 2006
    [grid@node1 grid]$ ssh date
    The authenticity of host ' (' can't be
    DSA key fingerprint is 7z:60:60:zz:48:48:z1:a0:f7:4e.
    Are you sure you want to continue connecting (yes/no)? yes
    Warning: Permanently added ',' (DSA) to the
    list of known hosts.
    Mon Dec 4 11:08:13 PST 2006
    [grid@node1 grid]$ ssh node2 date
    Mon Dec 4 11:08:35 PST 2006

    At the end of this process, the public hostname for each member node should be registered in the known_hosts file for all other cluster nodes.

    If you are using a remote client to connect to the local node, and you see a message similar to "Warning: No xauth data; using fake authentication data for X11 forwarding," then this means that your authorized keys file is configured correctly, but your SSH configuration has X11 forwarding enabled. To correct this issue, proceed to "Setting Display and X11 Forwarding Configuration".

  3. Repeat step 2 on each cluster node member.

If you have configured SSH correctly, then you can now use the ssh or scp commands without being prompted for a password. For example:

[grid@node1 ~]$ ssh node2 date
Mon Feb 26 23:34:42 UTC 2009
[grid@node1 ~]$ ssh node1 date
Mon Feb 26 23:34:48 UTC 2009

If any node prompts for a password, then verify that the ~/.ssh/authorized_keys file on that node contains the correct public keys, and that you have created an Oracle software owner with identical group membership and IDs.

D.2 Configuring Kernel Parameters

This section contains the following:


The kernel parameter and shell limit values shown in the following section are recommended values only. For production database systems, Oracle recommends that you tune these values to optimize the performance of the system. Refer to your operating system documentation for more information about tuning kernel parameters.

D.2.1 Configuring Kernel Parameters for SPARC Systems Running Solaris 10

On Solaris 10 operating systems, verify that the kernel parameters shown in the following table are set to values greater than or equal to the recommended value shown. The table also contains the resource controls that replace the /etc/system files for specific kernel parameters. As Oracle Clusterware does not set project information when starting processes, some /etc/system processes that are deprecated but not removed must still be set for Oracle Clusterware.

The procedure following the table describes how to verify and set the values.


In Solaris 10, you are not required to make changes to the /etc/system file to implement the System V IPC. Solaris 10 uses the resource control facility for its implementation. However, Oracle recommends that you set both resource control and /etc/system/ parameters. Operating system parameters not replaced by resource controls continue to affect performance and security on Solaris 10 systems. For further information, contact your Sun vendor.
Parameter Replaced by Resource Control Recommended value
noexec_user_stack NA 1
semsys:seminfo_semmni project.max-sem-ids 100
semsys:seminfo_semmns NA 1024
semsys:seminfo_semmsl process.max-sem-nsems 256
semsys:seminfo_semvmx NA 32767
shmsys:shminfo_shmmax project.max-shm-memory 4294967295
shmsys:shminfo_shmmni project.max-shm-ids 100

On Solaris 10, use the following procedure to view the current value specified for resource controls, and to change them if necessary:

  1. To view the current values of the resource control, enter the following commands:

    $ id -p // to verify the project id
    uid=100(oracle) gid=100(dba) projid=1 (group.dba)
    $ prctl -n project.max-shm-memory -i project group.dba
    $ prctl -n project.max-sem-ids -i project group.dba
  2. If you must change any of the current values, then:

    1. To modify the value of max-shm-memory to 6 GB:

      # prctl -n project.max-shm-memory -v 6gb -r -i project group.dba 
    2. To modify the value of max-sem-ids to 256:

      # prctl -n project.max-sem-ids -v 256 -r -i project group.dba


    When you use the command prctl (Resource Control) to change system parameters, you do not need to restart the system for these parameter changes to take effect. However, the changed parameters do not persist after a system restart.

Use the following procedure to modify the resource control project settings, so that they persist after a system restart:

  1. By default, Oracle instances are run as the oracle user of the dba group. A project with the name group.dba is created to serve as the default project for the oracle user. Run the command id to verify the default project for the oracle user:

    # su - oracle
    $ id -p
    uid=100(oracle) gid=100(dba) projid=100(group.dba)
    $ exit
  2. To set the maximum shared memory size to 2 GB, run the projmod command:

    # projmod -sK "project.max-shm-memory=(privileged,2G,deny)" group.dba

    Alternatively, add the resource control value project.max-shm-memory=(privileged,2147483648,deny) to the last field of the project entries for the Oracle project.

  3. After these steps are complete, check the values for the /etc/project file using the following command:

    # cat /etc/project

    The output should be similar to the following:

    group.dba:100:Oracle default
  4. To verify that the resource control is active, check process ownership, and run the commands id and prctl, as in the following example:

    # su - oracle
    $ id -p
    uid=100(oracle) gid=100(dba) projid=100(group.dba)
    $ prctl -n project.max-shm-memory -i process $$
    process: 5754: -bash
                   privileged         2.00GB     -             deny


    The value for the maximum shared memory depends on the SGA requirements and should be set to a value greater than the SGA size.

    For additional information, refer to the Solaris Tunable Parameters Reference Manual.

As an Amazon Associate I earn from qualifying purchases.