jo.\*:("Computer methods in applied mechanics and engineering")

Results 1 to 25 of 6220

Selection :

A direct method to predict cyclic steady states of elastoplastic structuresSPILIOPOULOS, Konstantinos V; PANAGIOTOU, Konstantinos D.Computer methods in applied mechanics and engineering. 2012, Vol 223-224, pp 186-198, issn 0045-7825, 13 p.Article

A finite element method based on capturing operator applied to wave propagation modelingDUTRA DO CARMO, Eduardo Gomes; DA SILVA GARCIA MONTEIRO, Cid; MANSUR, Webe Joao et al.Computer methods in applied mechanics and engineering. 2012, Vol 201-04, pp 127-138, issn 0045-7825, 12 p.Article

A gradient-enhanced damage approach for viscoplastic thin-shell structures subjected to shock wavesNGUYEN, A. D; STOFFEL, M; WEICHERT, D et al.Computer methods in applied mechanics and engineering. 2012, Vol 217-20, pp 236-246, issn 0045-7825, 11 p.Article

A nonlocal plasticity formulation for the material point methodBURGHARDT, J; BRANNON, R; GUILKEY, J et al.Computer methods in applied mechanics and engineering. 2012, Vol 225-228, pp 55-64, issn 0045-7825, 10 p.Article

A novel scheme to generate meshes with hexahedral elements and poly-pyramid elements: The carving techniqueSOHN, Dongwoo; CHO, Young-Sam; IM, Seyoung et al.Computer methods in applied mechanics and engineering. 2012, Vol 201-04, pp 208-227, issn 0045-7825, 20 p.Article

A topology optimization method based on the level set method for the design of negative permeability dielectric metamaterialsOTOMORI, Masaki; YAMADA, Takayuki; IZUI, Kazuhiro et al.Computer methods in applied mechanics and engineering. 2012, Vol 237-240, pp 192-211, issn 0045-7825, 20 p.Article

A two-level time step technique for the partitioned solution of one-dimensional arterial networksMALOSSI, A. Cristiano I; BLANCO, Pablo J; DEPARIS, Simone et al.Computer methods in applied mechanics and engineering. 2012, Vol 237-240, pp 212-226, issn 0045-7825, 15 p.Article

An efficient Wave Based Method for 2D acoustic problems containing corner singularitiesDECKERS, Elke; BERGEN, Bart; VAN GENECHTEN, Bert et al.Computer methods in applied mechanics and engineering. 2012, Vol 241-244, pp 286-301, issn 0045-7825, 16 p.Article

An implicit leap-frog discontinuous Galerkin method for the time-domain Maxwell's equations in metamaterialsJICHUN LI; JIAJIA WANG WATERS; MACHORRO, Eric A et al.Computer methods in applied mechanics and engineering. 2012, Vol 223-224, pp 43-54, issn 0045-7825, 12 p.Article

B-splines and NURBS based finite element methods for Kohn―Sham equationsMASUD, Arif; KANNAN, Raguraman.Computer methods in applied mechanics and engineering. 2012, Vol 241-244, pp 112-127, issn 0045-7825, 16 p.Article

Constitutive framework for the modeling of damage in collagenous soft tissues with application to arterial wallsBALZANI, Daniel; BRINKHUES, Sarah; HOLZAPFEL, Gerhard A et al.Computer methods in applied mechanics and engineering. 2012, Vol 213-216, pp 139-151, issn 0045-7825, 13 p.Article

Enforcing positivity with conservation for nine-point scheme of nonlinear diffusion equationsYANZHONG YAO; GUANGWEI YUAN.Computer methods in applied mechanics and engineering. 2012, Vol 223-224, pp 161-172, issn 0045-7825, 12 p.Article

Enhancing finite element approximation for eigenvalue problems by projection methodHUIPO LIU; NINGNING YAN.Computer methods in applied mechanics and engineering. 2012, Vol 233-236, pp 81-91, issn 0045-7825, 11 p.Article

Enhancing isogeometric analysis by a finite element-based local refinement strategyKLEISS, Stefan K; JÜTTLER, Bert; ZULEHNER, Walter et al.Computer methods in applied mechanics and engineering. 2012, Vol 213-216, pp 168-182, issn 0045-7825, 15 p.Article

Evaluation of the stiffness tensor of a fractured medium with harmonic experimentsSANTOS, Juan E; PICOTTI, Stefano; CARCIONE, José M et al.Computer methods in applied mechanics and engineering. 2012, Vol 247-248, pp 130-145, issn 0045-7825, 16 p.Article

Granular element method for computational particle mechanicsANDRADE, Jose E; LIM, Keng-Wit; AVILA, Carlos F et al.Computer methods in applied mechanics and engineering. 2012, Vol 241-244, pp 262-274, issn 0045-7825, 13 p.Article

Investigation of linear dependence problem of three-dimensional partition of unity-based finite element methodsAN, X. M; ZHAO, Z. Y; ZHANG, H. H et al.Computer methods in applied mechanics and engineering. 2012, Vol 233-236, pp 137-151, issn 0045-7825, 15 p.Article

Isogeometric analysis with Powell-Sabin splines for advection-diffusion-reaction problemsSPELEERS, Hendrik; MANNI, Carla; PELOSI, Francesca et al.Computer methods in applied mechanics and engineering. 2012, Vol 221-22, pp 132-148, issn 0045-7825, 17 p.Article

Isogeometric enriched field approximationsTAMBAT, A; SUBBARAYAN, G.Computer methods in applied mechanics and engineering. 2012, Vol 245-246, pp 1-21, issn 0045-7825, 21 p.Article

Large penetration algorithm for 3D frictionless contact problems based on a covariant formIZI, Ridvan; KONYUKHOV, Alexander; SCHWEIZERHOF, Karl et al.Computer methods in applied mechanics and engineering. 2012, Vol 217-20, pp 186-196, issn 0045-7825, 11 p.Article

Levenberg―Marquardt vs Powell's dogleg method for Gurson―Tvergaard―Needleman plasticity modelSHTERENLIKHT, A; ALEXANDER, N. A.Computer methods in applied mechanics and engineering. 2012, Vol 237-240, pp 1-9, issn 0045-7825, 9 p.Article

Local refinement of analysis-suitable T-splinesSCOTT, M. A; LI, X; SEDERBERG, T. W et al.Computer methods in applied mechanics and engineering. 2012, Vol 213-216, pp 206-222, issn 0045-7825, 17 p.Article

Long-time stable high-order absorbing boundary conditions for elastodynamicsBAFFET, Daniel; BIELAK, Jacobo; GIVOLI, Dan et al.Computer methods in applied mechanics and engineering. 2012, Vol 241-244, pp 20-37, issn 0045-7825, 18 p.Article

Multiscale failure modeling of concrete: Micromechanical modeling, discontinuous homogenization and parallel computationsVINH PHU NGUYEN; STROEVEN, Martijn; SLUYS, Lambertus Johannes et al.Computer methods in applied mechanics and engineering. 2012, Vol 201-04, pp 139-156, issn 0045-7825, 18 p.Article

Multiscale modeling using goal-oriented adaptivity and numerical homogenization. Part II: Algorithms for the Moore-Penrose pseudoinverseJHURANI, Chetan; DEMKOWICZ, Leszek.Computer methods in applied mechanics and engineering. 2012, Vol 213-216, pp 418-426, issn 0045-7825, 9 p.Article